Free Delivery on Orders Over $2000 Within 40km From the Store Location.

IN SCREED FLOOR HEATING

  • Covers heating area of ≤0.9m²
  • Heater Size: 10m
  • Total Output: 180W
  • Amps: 0.8
  • Output per linear m: 18W
  • Approximate cost per m²: $228.80
  • Weight: 1.4kg

Want to know more about our pricing?

Call us today at 0399426099 or 0414583698 for a free quote and expert advice!

In-Screed Heating Underfloor

Features:

  • Suitable for majority of floor finishes, including stone, ceramic tiles, slate, porcelain, limestone, marble, terracotta and more.
  • Designed to be installed directly on the existing sub floor or on top of waterproofing. The screed layer is then applied on top of the heaters and floor finish is laid over the top of the screed.
  • Supply-Only and installation services are available.

Our in-screed under floor heating cable is:

  • Teflon coated, 6mm thin loose heating cable, supplied on a reel with a single 3m long cold tail
  • 18W/lineal meter

Please note that the In-Screed under-floor heating cable has a minimum and maximum screed thickness of 25mm – 70mm.

Included in each kit:

  • In-Screed Heater on a reel
  • Installation Monitor (element alarm) with battery
  • Installation Manual
  • 25 Year Warranty
  • Note: Thermostats sold separately

Basic Installation Instructions: 

  • Calculate the cable spacing based on the floor area to be heated and the length of the heater (formula on each heater box and inside the installation manual).
  • Plan heater layout before securing the heating to the subfloor in order to ensure it will fit properly into the floor space available
  • Ways to fix the heating cable to the subfloor:
    • Non-Wet Areas 🡪 Fixing rails nailed into subfloor, secured to mesh with cable ties, glued or taped down
    • Wet Areas (where heating will be laid onto waterproofing) 🡪 Glued or taped down, glued down fixing rails or secured to mesh with cable ties
  • For more in-depth instructions, consult your instruction manual contained in every heater kit.

The In-Screed heating cable is a bi-directional, single-ended 6mm heating cable, rated at 18W/m and supplied as a cable on a roll. To achieve the required wattage per square meter, secure the cable at the spacing centres according to the simple formula provided. The In Screed Heating Cable has a single 3m long cold tail lead that can be connected to a programmable or manual thermostat control. A range of 14 standard lengths or a combination of these lengths caters for all area sizes and shapes.

Related Products

Our Happy Customers

Request a Quote
close slider






      MY SHOPPING CART
      Your cart is emptyReturn to Shop
        preloader